Troubleshooting (F); Accessories; Customer Service - Rothenberger ROPULS Instrucciones De Uso

7.3 Troubleshooting
In case of air loss proceeds as follows: (Fig. F1)
a) Charge compressor to maximum pressure.
b) Pull plug from socket.
c) With a paint brush dipped into soap water, daub all screws. Any air loss is discovered when
bubbles form.
If - with the compressor switched off - air is lost at the pressure control valve, proceed as fol-
lows:
a) Completely empty the compressed air tank.
b) Remove plug N (Fig. F1) from the 'retainer' valve.
c) Carefully clean valve base and seal, and reassemble.
Motor protection
The compressor is equipped with motor protection that automatically interrupts the current sup-
ply (Fig.F2) in the event of an overload.
In this case, switch off the current supply and wait several minutes before you reset the motor
circuit breaker and restart the machine. If the circuit breaker trips again, disconnect the power
supply and contact an authorized customer service facility.
We recommend that you let off pressure from the boiler.
a) If possible, do not disassemble fittings while tank is under pressure. Always ensure
that it is discharged.
b) While the plug is in the socket, the cover of the pressure control may not be re-
moved.
8

Accessories

Accessory Name
Connecting hose
ROCLEAN Injector
Pressure regulator 2 bar
Chemical cleaning:
Radiator heating systems
Surface heating systems
Preservative
Disinfection
9

Customer service

The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using our service-after-
sales hotline:
Phone: + 49 (0) 61 95 / 800 – 8200
Fax: + 49 (0) 61 95 / 800 – 7491
Email: service@rothenberger.com
www.rothenberger.com
22
ROTHENBERGER Part Number
H81063
1000000190
1500000203
1500000200
1500000201
1500000202
1500000157
ENGLISH
(F)