Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
14
Note: Always check the temperature before you feed your
baby (Fig. 9).
5
Turn the knob back to the 'off' position when the bottle/
container is removed from the bottle warmer (Fig. 10).
Using the bottle warmer with defrost setting
1
Put the mains plug in the wall socket (Fig. 3).
2
Place the bottle or container in the bottle warmer (Fig. 4).
3
Fill the bottle warmer with drinking water up to the level
of the milk/baby food in the bottle/container. In case of
large amounts of milk/baby food, the maximum level of
water is approximately 1 cm below the top of the bottle
warmer (Fig. 5).
4
Select the position of defrost (Fig. 6).
At this setting, your frozen milk/baby food can be defrosted
till liquid state.
For frozen milk, check the warming reference table for the
expected defrost timings, as indication one small and one
larger milk volume are included in the table. After your milk is
defrosted, choose express warming setting or keep warming
setting to warm your milk. Please refer to the previous
chapters for usage instructions. Consider the start
temperature of your milk around fridge temperature for the
warming timings as rough guideline.
60 ml/2 oz-90 ml/3 oz
180 ml/6 oz-210 ml/7 oz
5
You may also defrost baby food in Philips Avent food
container by this setting. After your baby food is
defrosted, choose food warming setting to warm it.
Please refer to the previous chapter for usage instruction.
ml/oz
hours
1-1.5
1.5-2.5
Publicidad
