IWC Schaffhausen DA VINCI CHRONOGRAPH EDITION LAUREUS SPORTS FOR GOOD FOUNDATION Instrucciones De Manejo página 25

Taking the bracelet apart and removing individual links
displace the unmarked pivot pin laterally by about 3 mm (2) with the second
special tool.
Determining bracelet length
of the bracelet, if possible, to ensure that the clasp can be worn more or
less at the centre of the wrist.
Keep the surplus links and the separating tools safely for use in subsequent
adjustments.
Open the push-button release safety clasp by pressing
the button on the side. Lay the bracelet with its top
surface on a firm base. Using the special tools provid-
ed, you can now push down the securing pin (1) at
the desired point of separation and, at the same time,
Now pull the protruding pivot pin from the bracelet (3).
The metal bracelet is now separated, and you can ad-
just the length of the bracelet by removing or adding
individual links.
Place the watch with its separated bracelet on your
wrist and estimate the number of links you need to re-
move (as described above).
If you need to shorten the bracelet by several links, you
should remove the same number of links from each half
22 | 23