5
C
6
D
7
8
E
• ENGLISH •
ASSEMBLY
P1
5. ADJUSTING THE BACKREST
The high chair backrest can be reclined in 3 positions (P1), (P2) and (P3).
To adjust the tilt of the backrest, press the button (C) located at the top on the back, lift
up or recline the backrest to the desired position and release the lever. The backrest
will lock in one of the three positions and you will hear a click when it is engaged.
This process can also be carried out with the child in the high chair.
IMPORTANT: for children unable to sit up unaided (under 6 months of age), use the
backrest in position 3 only (bouncer version).
6. ADJUSTING THE HEIGHT OF THE HIGH CHAIR SEAT
The HIGH CHAIR can be positioned at 5 different heights.
• To lift up the seat: Hold the backrest at the top and pull it upwards until you
reach the desired height.
• To lower the seat: push the "D" buttons at the bottom outwards at the same
time and lower the seat to the desired position. Release the buttons. A click will
indicate that it has locked in position.
Make sure that the seat is locked properly in the new position.
CAUTION: Make sure you adjust the seat without the child placed in the HIGH
CHAIR.
7. REMOVING THE INNER TRAY
To remove the inner tray (8) pull the clips on the sides and lift it up.
The inner tray is fixed to the main tray using a pressure mechanism.
To attach the inner tray, place it on top of the main tray and press
downwards; the securing clips will lock the inner tray to the main
tray.
CAUTION: Always make sure that the inner tray is correctly
clipped to the main tray, before each use.
8. ADJUSTING THE LEG REST
The leg rest can be adjusted to 3 positions.
Press the two "E" adjustment buttons at the same time and raise
or lower the leg rest support.
Release the buttons and check that the leg rest has locked
correctly in the desired position.
A click will indicate that it has locked correctly.
E
14
P2
P3