Optional Features; Door Storage - Sears Kenmore 253.6081 Serie Manual De Uso Y Cuidado

Optional Features

CAUTION
Do not clean glass shelves or covers
with warm water when they are
cold. Shelves and covers may break
if exposed to sudden temperature
changes or impact, such as bumping.
Tempered glass is designed to shatter
into many small, pebble-size pieces.
This is normal. Glass shelves and
covers are heavy. Use both hands when
removing them to avoid dropping.
Shelf Adjustment
Refrigerator shelves are easily adjusted to
suit individual needs. Before adjusting the
shelves, remove all food.
To adjust sliding shelves:
1. Remove shelf by pulling forward to
stop position.
2. Lift front edge up and pull out.
To replace shelf, rest side edges on any
pair of shelf rails and carefully push shelf
back into position.
Sliding Glass Shelf
Sliding Wire Shelf
To adjust
slide-under/
flip shelf:
1. Pull front
half shelf
forward
until its
back
drops
down,
then
gently push front half shelf back and
under back half shelf.
2. With front half fully below back half,
lift front of shelf to flip it upwards
toward the back of the cabinet.

Door storage

Door bins, shelves, and racks are provided for
convenient storage of jars, bottles, and cans.
Frequently used items can be quickly selected.
The dairy compartment, which is warmer than
the general food storage section, is intended for
short term storage of cheese, spreads, or butter.
Door rack
Some models have door racks or bins that
can accommodate gallon-sized plastic
drink containers and economy-sized jars
and containers.
To remove door rack:
1. Push on
rack sides
to release
from
locking
tabs.
2. Pull
straight
out.
To install door
rack:
1. Push rack
straight ahead.
2. You will hear the sides lock into the tabs.
17
2
Slide-Under/Flip Shelf
Door Rack
1