Sears Kenmore 253.6081 Serie Manual De Uso Y Cuidado página 8

First Steps
2. Attach toe grille to cabinet.
(some models)
NOTE
In case of future door reversals, save the
toe grille cover not being used.
To level the cabinet:
1 Remove the toe grille.
2 Use a flat-blade screwdriver or ⅜
inch socket wrench to raise or lower
the front rollers (Figure 2). Do not
raise the cabinet more than 9/16 inch.
9/16"
(14 mm)
Max
Figure 2
or
Raise
or
3 Use adjustable wrench to adjust leveling
screws. Lower the leveling screws on
each side clockwise until they contact
the floor (Figure 3). Do not raise the
cabinet more than 9/16 inch.
9/16"
(14 mm)
Max
NOTE
Raise the front of the refrigerator enough
so the doors close freely when opened
halfway. The refrigerator should slope ¼
inch to ½ inch from front-to-back. Then
level the refrigerator from side-to-side.
8
Raise
Figure 3