Installation Instructions; Tools Required For Assembly; Leg Assembly; Care And Maintenance - Duraflame DFI-5010-01 Manual De Instrucciones

INSTALLATION INSTRUCTIONS

Tools Required for Assembly

Leg Assembly

1
Bracket
1. Align the mounting tab into the bracket and
lower the leg into place. (Fig 1)

CARE AND MAINTENANCE

• Clean the trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean soft cloth.
• DO NOT use brass polish or household cleaners as these products will damage the metal trim. Citrus oil based
products can be obtained at supermarkets or hardware stores.
• WARNING: Electrical outlet wiring must comply with local building codes and other applicable regulations to
reduce the risk of fire, electrical shock and injury to persons.
• Warning: Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electrical
shock or personal injury.
A464
Phillips Head Screwdriver
Leg
2
2. Fasten the leg to the bracket using the included
screws, 3 per leg.
4
www.tsicustomerservice.com