Installation Instructions; Tools Required For Assembly; Leg Assembly; Care And Maintenance - Duraflame DFI-500-4 Manual De Instrucciones

INSTALLATION INSTRUCTIONS

Tools Required for Assembly

Leg Assembly

1
Align the 2 mounting tabs into the
bracket.

CARE AND MAINTENANCE

• Clean the trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean soft cloth.
• DO NOT use brass polish or household cleaners as these products will damage the metal trim. Citrus oil based
products can be obtained at supermarkets or hardware stores.
• Periodic cleaning/vacuuming of the filter is recommended.
• WARNING: Electrical outlet wiring must comply with local building codes and other applicable regulations to
reduce the risk of fire, electrical shock and injury to persons.
• Warning: Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electrical
shock or personal injury.
A406
Phillips Head Screwdriver
2
Slide the legs outward to lock in
place. When locked in position
the screw hole from step 3 will be
aligned.
4
3
Fasten the legs to the base using the
included screws,1 per leg
www.tsicustomerservice.com