Technical Specifications - SPARKY Professional K 2050 Instrucciones De Uso

Technical specifications

Model:
▪ Power input:
▪ Impact rate:
▪ Impact energy:
▪ Tool holder / bit length:
▪ Weight (EPTA Procedure 1/2003):
▪ Safety class: (EN 60745-1)
Noise and vibration information
▪ Noise emission (measured values determined according to EN 60745):
A-weighted sound pressure level L
Uncertainty К
pA
A-weighted sound power level L
Uncertainty К
wA
▪ Guaranteed sound power level (Directive 2000/14/EC)
Wear hearing protection!
▪ Vibration emission (determined according to 6.2.7 EN 60745-1):
Total vibration values (vector sum in the three axes) determined according to EN 60745
▪ Chiselling:
Vibration emission vallue a
Uncertainty K
CHeq
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for dif-
ferent applications, with different accessories or poorly maintained, the vibration emission may differ. This may signifi-
cantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total
working period.
Maintain the power tool and the accessories and keep your hands warm during operation to reduce the harmful effect
of vibrations.
Original instructions
pA
wA
h,CHeq
K 2050
2000 W
1500 min
-1
50 J
Hex. 28 / 410 mm
20 kg
II
84 dB(A)
3 dB
104 dB(A)
3 dB
106 dB(A)
15.3 m/s
2
1.5 m/s
2
3
EN