Battery Charging Times; Charging The Battery; Inserting The Battery - Hilti C7 Manual De Instrucciones De Funcionamiento

Ocultar thumbs Ver también para C7:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
Battery
Output voltage
Output power
Supply cord length
Weight
Dimensions (L x W x H)
Control
Protection class
4.2
Temperature specifications
Battery charging starting temperature
Storage temperature
Ambient temperature for operation
4.3

Battery charging times

Voltage
7.2 V
7.2 V
5
Operation
5.1
Switching the charger on
▶ Plug the supply cord into the power outlet.
➥ LED 1 on the charger lights up green.
5.2

Charging the battery

1. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
➥ A list of the batteries approved for use with this product can be found at the end of this document.
2. Push the battery into the interface of the charger. Check that the encoding of the battery and charger
interface match.
➥ Charging begins automatically after insertion of the battery in the charger. The state of charge
indicator on the battery is deactivated during charging.
The battery will suffer no damage when left in the charger for long periods.
For safety reasons, the battery should, however, be removed from the charger after completion of
charging.
5.3

Inserting the battery

CAUTION
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery and the contacts on the product
are free of foreign matter.
▶ Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the battery holder until it engages with an audible click.
3. Check that the battery is seated securely.
12
English
Printed: 03.12.2018 | Doc-Nr: PUB / 5069448 / 000 / 02
Battery type
B 7/1.5 Li-Ion
B 7/2.0 Li-Ion
Li­ion
7.2 V
12.6 W
≈ 2 m
0.775 kg
152 mm x 102 mm x 58 mm
Electrical charging monitoring
and control via microcontroller
Protection class II (double insu-
lated)
−10 ℃ ... 45 ℃
−20 ℃ ... 40 ℃
−17 ℃ ... 60 ℃
Charging time
≈ 45 min
≈ 60 min
440647
*440647*

Publicidad

Tabla de contenido
loading

Tabla de contenido