Information Displayed; Information Displayed By The Charger And Battery - Hilti C 4/36-MC4 Manual De Instrucciones

página de 144

/ 144
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

All manuals and user guides at all-guides.com

▶ Make sure that the batteries suffer no mechanical damage.

▶ Do not charge or continue to use damaged batteries (e.g. batteries with cracks, broken parts, bent or

pushed-in and/or pulled-out contacts).

2.3

Battery use and care

▶ Observe the special regulations and instructions applicable to the transport, storage and use of Li-ion

batteries.

▶ Do not expose batteries to high temperatures, direct sunlight or fire.

▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C.

▶ Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height

or show signs of damage. In this case, always contact your Hilti Service.

▶ If the battery is too hot to touch it may be defective. In this case, place the product in a non-flammable

location, well away from flammable materials, where it can be kept under observation and allowed to

cool down. In this case, always contact your Hilti Service.

Description

3.1

Overview of the product

3.2

Intended use

The product described is a battery charger for Hilti Li-ion batteries with a rated voltage of 7.2 to 36 volts. It

is designed to be connected to power outlets providing an AC voltage (alternating current) of 100 to 240 V

(depending on country-specific version).

A list of the batteries approved for use with this product can be found at the end of this document.

3.3