Intended Use; Information Displayed; Information Displayed By The Charger And Battery - Hilti C 4/36 MC4 Manual De Instrucciones

All manuals and user guides at all-guides.com

3.2 Intended use

The product described is a battery charger for Hilti Li-ion batteries with
a rated voltage of 7.2 to 36 volts. It is designed to be connected to
power outlets providing an AC voltage (alternating current) of 100 to 127 V
(depending on country-specific version).
A list of the batteries approved for use with this product can be found at the
end of this document.

3.3 Information displayed

3.3.1 Information displayed by the charger and battery

The supply voltage LED lights when the charger is plugged in and ready for
operation.
Battery charge
state LEDs
­
Off
LEDs 1 to 4 blink
first and then light
to indicate the
battery's state of
charge.
Off
Off
Off
3.3.2 Li-ion battery charge state display
Status
3 LEDs light, 1 LED blinks.
2 LEDs light, 1 LED blinks.
1 LED lights, 1 LED blinks.
1 LED blinks.
6 English
Printed: 20.07.2017 | Doc-Nr: PUB / 5253186 / 000 / 05
Charge status Battery tem-
LED perature LED
Off Off
Off Off
Blinks Off
Lights Off
Off Blinks
Off Lights
Meaning
• Charge state: 75 % to 100 %
• Charge state: 50 % to 75 %
• Charge state: 25 % to 50 %
• Charge state: < 25 %
Description
No battery is in-
serted.
Battery is inserted
and ready to
charge.
The battery is
charging.
The battery is fully
charged.
Battery tempera-
ture is outside the
permitted range
(too hot, too cold).
Battery malfunc-
tion, charger mal-
function.
2