• Before using the appliance, this operating manual must be read
carefully and followed in all points.
Use for the intended purpose; exclusion of liability
• The measuring device may only be used within the specified
technical data and only under the conditions and for the purposes
for which it was designed.
• Operational safety can no longer be ensured if modifications or
conversions have been made.
• Before each measurement, appropriate measures must be taken
to ensure that no uncovered electrical cables are situated at the
measurement points.
G
• Use in direct contact with or in the vicinity of devices that are
sensitive to high frequencies (e.g. medical equipment, cardiac
pacemakers etc.) is to be avoided.
• Do not measure on metallic surfaces.
• The determination of valid measuring results, conclusions and
actions derived from them are exclusively the responsibility of
the user! Any liability or guarantee for the correctness of the re-
sults obtained is excluded. Under no circumstances will any lia-
bility be accepted for damage resulting from the use of the
measuring results that were obtained.
Operating Manual – Moisture Indicator
B - 2