General Safety Notes; Intended Use; Material That Can Be Processed And Crimping Shape; Safety Equipment - Weidmuller Crimpfix R Vario Manual De Instrucciones

2

General safety notes

2.1 Intended use

The machine is intended for the stripping and crimping
of flexible wires in one work process. Only the material
described below (wires and wire-end ferrules) may be pro-
cessed using the machine.
Process-safe processing can only be guaranteed for Weid-
müller wire-end ferrules. The processing of other makes
may lead to faults and damage to the machine.
The machine must only be used within the technical limits
described (see section 3.1). Modifications to and recon-
structions of the machine must not be performed.
Intended use also includes paying attention to the docu-
mentation.
2.2 Material that can be processed and
crimping shape
Wires
Flexible PVC cable H05V-K and H07V-K with a cross sec-
tion of 0.5–2.5 mm².
Wire-end ferrules
Weidmüller wire-end ferrules on reel:
H0,5/14 H0,5/14 S
H0,75/14 H0,75/14 S
H1,0/14 H1,0/14 S
H1,5/14 H1,5/14 S
H2,5/14
Crimp form
Trapezium (standard)
2583060000/00/03.2018
H0,5/16 H0,5/16 S
H0,75/16 H0,75/16 S
H1,0/16 H1,0/16 S
H1,5/16 H1,5/16 S
H2,5/16

2.3 Safety equipment

The machine is equipped with the following safety devices:
– Safety switch inside on the front plate
– 3/2-way directional valve
– Mains adapter
These items of safety equipment must not be rendered
ineffective. They must be checked once per year by a ser-
vice technician.

2.4 Personnel

Only trained personnel may operate the machine and per-
form maintenance activities. Training also includes having
fully read the operating instructions.
Repairs may only be performed following con-
sultation with Weidmüller Service and only by
an electrical specialist.
Keep the operating instructions stored so that
they can be inspected by operating personnel
at any time.
All documents can also be downloaded from
the Weidmüller website.
27