Cleaning The Interior; Servicing The Tool Slide; Servicing The Transport Unit - Weidmuller Crimpfix R Vario Manual De Instrucciones

Cleaning and maintaining the machine

7.9 Cleaning the interior

► Remove the waste container.
► Clean the inside of the machine with a brush and, if nec-
essary, with a vacuum cleaner.
Never use compressed air for cleaning the inside
because otherwise small parts (e.g. stripping
residues) become inaccessible on the inside of
the machine. This may result in malfunctions and
operational stoppages.

7.10 Servicing the tool slide

1
Figure 7.7 Servicing the tool slide (quarterly)
► Pull the stranded wire fixing unit forwards.
► Lubricate the contact surface (1).
► Bring the stranded wire fixing unit back into position.

7.11 Servicing the transport unit

► Remove all wire-end ferrule reels, see section 5.6.
1
Figure 7.8 Transport unit
► Release the screws (1) and remove the cover.
42
1
2
Figure 7.9 Transport unit
► Apply a tiny bit of oil onto the aluminium on both sides
(1) of each brass slider.
► Move the brass slider (2) up and down to distribute the
oil.
► Fix the cover back on.
1
2583060000/00/03.2018