Optional Kits; Accessories; Packing And Unpacking; Setting To Work - Connection To The Power Supply - Nilfisk cfm 118 Manual De Instrucciones

Optional kits

The following optional kits are available for converting
the vacuum cleaner:
- grill and depressor;
- dust container in a paper bag.
On request, the vacuum cleaner can be supplied with
optional kits already installed. However, they can also
be installed at a later date.
Please contact the manufacturer's sales network for
further details.
Instructions describing how to fit the optional kits and
the relative operation and maintenance manuals are
supplied together with the optional kits.
WARNING!
Use only genuine optional kits supplied and
authorized by the manufacturer.

Accessories

Various accessories are available; refer to the
manufacturer's accessory catalogue.
WARNING!
Use only genuine accessories supplied and
authorized by the manufacturer.

Packing and unpacking

Dispose of the packing materials in compliance with
the laws in force.
Cardboard box packing (fig. 2)
Model 118 - 118 L, M, H
A (mm)
B (mm)
C (mm)
Weight with packing (lbs.)
02/2013
Setting to work - connection to the power
supply
- Make sure that the vacuum cleaner is in
perfect condition before starting work.
- Before plugging the vacuum cleaner into
the electricity mains, make sure that the
voltage rating indicated on the data plate
corresponds to that of the electricity mains.
- Plug the vacuum cleaner into a socket
with a correctly installed ground contact/
connection.
- Make sure that the vacuum cleaner is off.
- The plugs and connectors of the connection
cables must be protected against splashed
water.
- Make sure that connections to the electricity
mains and plug are correct.
- Use the vacuum cleaners only when the
cables that connect to the electricity mains
are in perfect condition (damaged cables
could lead to electric shocks!).
- Regularly check that the electric cable does
not show signs of damage excessive wear,
cracks or ageing.
When the vacuum cleaner is operating, do not:
- crush, pull, damage or tread on the cable
that connects to the electricity mains;
- only disconnect the cable from the electricity
mains by removing the plug (do not pull the
cable).
23.6
- only replace the electric power cable with
one of the same type as the original: SJT.
23.6
The same rule applies if an extension is
39.4
used.
72.75
- he cable must be replaced by the
manufacturer's Service Centre staff or by
equivalent qualified personnel.
5
WARNING!
WARNING!
118
US
C384