Overheating Protection; Safety Information - UNITED OFFICE ULG 300 B1 Instrucciones De Uso

Overheating protection

This appliance is fitted with overheating protection.
If the motor overheats due to overloading, the appliance switches itself off auto-
matically. In this case, disconnect the power cable and wait until the appliance
has cooled down to room temperature. You can then reconnect the plug to a
mains power socket and take the appliance back into use.
We recommend that you let the appliance cool down for about 30 minutes after
2 hours of operation.

Safety information

Check the appliance for visible external damage before use.
■
Never operate an appliance that is damaged. There is a
risk of electrocution.
All repairs must be carried out by authorised specialist
■
companies or by the customer service department. Improp-
er repairs can pose significant risks to the user. It will also
invalidate any warranty claims.
To avoid risks, arrange for a defective power cable to be re-
■
placed by qualified technicians or by our Customer Service
Department.
NEVER use the appliance with a defective power cable.
■
There is a risk of electrocution.
Do not use extension cables or power socket strips that do
■
not meet the required safety standards.
The mains power socket must be easily accessible, so that
■
the power cable can be easily disconnected in the event of
an emergency.
│ GB │ MT
■ 52
ULG 300 B1