Anti-Blocking Function (Abs); Cutting Function - UNITED OFFICE ULG 300 B1 Instrucciones De Uso

Anti-blocking function (ABS)

At the start of the lamination process, the pouch may be pulled in at an angle or
jam itself inside the appliance.
♦ Turn the anti-blocking switch
longer be drawn in.
♦ Remove the pouch and turn the anti-blocking switch
pouch thickness.
♦ Re-start the lamination process.

Cutting function

If you want to use the cutting function on the pouch guide rail
pouch guide rail
♦ If necessary, fold in the document supports
♦ Attach the cutting attachment
pouch guide rail
another flat surface.
♦ Push the cutting head
pushed to both ends of the cutting rail
♦ Flip up the cutting rail
documents on the pouch guide rail
the pouch format guide
document.
♦ Use the markings on the scale table to align your document precisely.
♦ Flip the cutting rail
♦ Hold the paper firmly in place with one hand.
♦ To cut, press the cutting head
over the document in a single movement.
ULG 300 B1
e
to the position ABS. The pouch will no
1
.
w
so that it creates a flat surface with the
1
. To do this, place the pouch guide rail
3
as far as the stop (the cutting head
2
up using the rounded handle and position the
4
together until it is touching both sides of the
2
down so it clicks into place.
3
downwards with the other hand and push it
e
back to the desired
1
q
.
2
).
1
. Fix the document in place by pushing
GB │ MT
, take off the
1
on a table or
3
can be
│
59 ■