Controls And Settings - Silk’n Lipo H5001 Manual Del Usuario

Slide each end of the belt into the connectors and then fold backwards,
6.
so that the Velcro pad sticks to the belt. Your belt will now look like this.
7. Of course, to use Silk'n Lipo you will need to disconnect one side, place the
belt on your body and then reconnect the side you disconnected!
a
Note that you can only use the device when:
the treatment unit is charged.
y
you have placed a wet electrode pad on each treatment unit (see
y
section "4.4 Wetting the electrode pads").
each treatment unit is in good contact with your skin.
y
you have read this manual, and understand how to use the device.
y

4.2 Controls and settings

Each treatment unit has a control panel that includes:
U
a control button (#2)
U
2 EMS energy level buttons (left and right of the control button)
U
2 indicator lights - left and middle (#3)
Battery / Error Operating Not in use
11
EN