Technical Specifications - Extel WEVA Instrucciones De Uso E Instalación

8. APPLICATIONS
a. Camera Setup
1• Camera Brightness :
Press OK to enter Camera Brightness ajustement bar.
Press to adjust brightness, press OK to confirm and exit.
2• Pairing :
Press , then press OK to enter Pairing menu, system will count down 60 seconds (fig.5-1) in the control box
wihin 60 seconds. Once pairing completed, it will display image of door unit.
N.B. : It strongly recommeded to pair with door unit before installation.
Press ESC to exit.
1•
b. Recorder Setup (the recorded sequences are in file «.avi»)
1• Visiting record : Use to set ON/OFF
N.B. : If no answering, answering unit will record 30 seconds and then screen will be turned off automatically.
The indicator will signal an unread recording
2• SD card format :
Press OK to enter SD card format
Select & press OK to format
N.B. : Make sure SD card is unlocked (Comments p11). For first time use, it'is recommended to format SD card
3• SD card overwrite : If the card is full, this mode is used to select permanent overwriting of the first recordings
by the most recent ones.
Use to select ON/OFF, press OK to save
Press ESC to exit.
2•
1•
c. Event List
1• In view mode :
Press OK to enter record folder.
Continue to press OK to play/pause file.
2• Inplaying mode :
Press to adjust the volume
Press to fast backward 2x, 4x, 8x &16x
Press ESC to stop and exit
CFI EXTEL WEVA - 11/2011
GB7
2•
3•
3• In delecting mode :
Press DEL to enter deletion mode
Use to delete the selected file or delete all
Press OK and select then press OK to delete
Press ESC to exit.
d. System setup
1• Time setting :
Press to select the item desired : Year/Month/Day/Hours/Minutes.
Press to change the system clock.
Press OK to confirm the settings.
2• Software version : it displays system version of answering unit & door unit.
3• TV format : Use to select TV systeme between NTSC & PAL (recommended).
4• Factory default : Press OK to enter in the menu, select
Press ESC to exit.
1•
3•
9. TECHNICAL SPECIFICATIONS
a. Technicals specifications :
RF specification
- Frequency radio 2,402-2,454 GHz
- GFSK (Frequency Hopping Spread Spectrum) numerical modulation
- Anti-interference
- Chain bandwidth: 2MHz
b. Monitor (MN WEVA)
- Reference : 810268
- Screen: 18 cm in diagonal
- Monitor power supply: 5V
- Power consumption: 900 mA
- Dimensions : 220 x 143 x 35 (mm)
- Operating temperature: -10°C to + 40° approx.
CFI EXTEL WEVA - 11/2011
3•
, then press OK
2•
4•
DEL OK ESC V
GB8