Assembly; Stroller Frame; Front Wheels; Rear Wheels - Britax PATHWAY Guia Del Usuario

Assembly

Stroller Frame

1� Push the release on the chassis lock
and open the frame�
NOTE: The chassis lock can be turned
off by rotating until parallel with the
stroller frame.
2� Lift handle until frame locks into upright
position�

Front Wheels

Installing the Front Wheels
1� Slide the front wheel assembly onto
the mounting post at the front of the
stroller�
2� Pull wheel to ensure that it is secure�
6
Removing the Front Wheels
1� Press the release button at the top of
the mounting post and pull the wheel
away from the stroller�

Rear Wheels

Installing the Real Wheels
1� Slide the rear wheel axle into the rear
wheel hub mounting bracket until it
locks into place�
2� Pull wheel to ensure that it is secure�
Removing the Rear Wheels
1� Pull and hold the release lever at the
bottom of the rear wheel hub while
pulling the rear wheel away from the
stroller�
7