Securing Your Child - Britax B-READY Guia Del Usuario

2. Pull the harness strap retainer away
from the seat back and turn 90
degrees to feed it through the harness
slot.
3. Push the harness retainer through the
appropriate harness slot to the back of
the seat.
4. Turn the harness retainer to its original
position as shown so it properly retains
the harness.
5. Repeat for the second harness strap
then close the zipper on the seat back.
16

Securing Your Child

1. Release the harness by depressing the
button in the center of the buckle while
pulling the two tongues away from the
buckle assembly.
2. Buckle the harness around your
child by inserting the tongues on
the harness straps into the buckle
assembly.
NOTE: Ensure the straps are
not twisted as they may become
uncomfortable for the child.
3. Tighten or loosen the harness straps by
sliding the harness adjusters.
17