Joyello JL-1050 SECURFIX BRUUM Manual De Instrucciones página 24

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

GB
seat: therefore, we suggest to install the car seat on the rear seat of the vehicle.
The installation and car seat adjustment operations must only be carried out by a competent adult.
The assembly and installation needs to be carried out without the baby in the car seat.
Make sure that all the passengers in the vehicle know how to release the child from the child car
seat in case of an emergency.
Always use the child car seat, fitted correctly and with the safety harness fastened, including short
journeys. Not using the child car seat constitutes a danger to your child's safety. In particular, check
that the safety harness is tensioned correctly, is not twisted and that it is fastened in the correct
position.
The lap belts of the harness system must be fitted as low down as possible so that the child's hips
are held correctly
Never use this child car seat on side-facing or rear-facing car seats.
Only fit the child car seat onto seats which are fastened to the car chassis and facing forwards.
Make sure that all folding or rotating car seats are always securely fastened in place , If not, they
could be dangerous.
When fitting the child car seat in the car make sure that no car seat or door can interfere with it.
No car seat can guarantee the total safety of your child in the event of accident, but the use of this
product reduces the risk of serious injuries.
The risk of serious injuries to the child increases, not only in the case of accidents, but also in other
circumstances (i.e.: sudden braking, etc.) if these instructions are not followed carefully: always
check that the child car seat is secured correctly to the vehicle's seat.
If the car seat is damaged, deformed or worn out, it must be replaced: it may no longer meet the
original safety standards.
This product must not be modified in any way unless approved by manufacturer.
Do not fit any accessories, spare parts or components not supplied or approved by the manufacturer.
Never leave your child unsupervised in the car seat whether harnessed or not.
Always ensure that the child car seat is securely fastened to the car seat; if not , it could hurt or
harm passengers.
Do not insert anything between the car seat and the child car seat, or between the child car seat
and the child, unless it is an accessory approved by the manufacturer: in the event of an accident,
the child car seat may not work properly.
Do not use anything, for example pillows, blankets, etc., to distance the child car seat from the car
seat or to distance the child from the child car seat: in the event of an accident, the child car seat
may not operate correctly.
Do not let children play with the components or parts of the child car seat.
Do not carry more than one child at a time in the child car seat.
After an accident, even a minor one, the child seat incurs damage, even if it is not visible to the
naked eye. It must be therefore be replaced.
Do not use second-hand child car seats: they may have suffered structural damage not visible to
the naked eye but liable of compromising the safety of the product.
24

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Jl-1051 securfix bruum

Tabla de contenido