Configuring The Base's Lines; Line Priority; Choosing The Ringing Group - THOMSON speedtouch D150 Manual Del Usuario

STD150.qxd 12/05/04

2. CONFIGURING THE BASE'S LINES

You can configure the base's lines according to your requirements.
2.1

LINE PRIORITY

You have the following options for managing the outgoing calls for each hand-
set:
- Alternative (Line 1 or Line 2): default setting
- Line 1 First: line 1 takes priority and if this line is busy, line 2 will be used
- Line 2 First: line 2 takes priority and if this line is busy, line 1 will be used
- Line 1 Only (line 1): line 1 authorized and no access to line 2
- Line 2 Only (line 2): line 2 authorized and no access to line 1
- No Ext (internal calls only)
This line priority has no effects on the reception of incoming calls.
Press to enter the menu.
l
Select "BS Setting" and press
l
Enter the "MASTER PIN:" 1590 (default) and press
l
Select "Select Line" and press
l
Use the direction keys to choose the handset you want from the list and
l
press to confirm (HS 1 = handset 1).
Choose the line priority from the 6 options given above and press
l
confirm.
2.2

CHOOSING THE RINGING GROUP

Each handset may receive a call on line 1 and/or line 2.
For example, you may decide that handsets 1, 3 and 5 will be associated with
line 1 and ring on line 1 and that handsets 2 and 4 will be associated with line 2
and ring on line 2.
Press to enter the menu.
l
Select "BS Setting" and press
l
Enter the "MASTER PIN:" 1590 (default) and press
l
32
14:01 Page 32
to confirm.
to confirm.
to confirm.
to confirm.
to
to confirm.