Changing The Handset's Pin Number; Adjusting The Automatic Line Seizure; Associating / Disassociating A Handset With The Base; Associating An Extra Handset With The Base - THOMSON speedtouch D150 Manual Del Usuario

STD150.qxd 12/05/04
5.7

CHANGING THE HANDSET'S PIN NUMBER

Press to enter the menu.
l
Select "HS Setting" and press
l
Select "Set PIN:" and press
l
Enter the PIN code: 1590 (by default) and press
l
Enter the new PIN code and press
l
Confirm the new PIN code and press
l
5.8

ADJUSTING THE AUTOMATIC LINE SEIZURE

The automatic line seizure function allows you to take an incoming call, by
pressing any of the keys on the telephone.
Press to enter the menu.
l
Select "HS Setting" and press
l
Select "Anykey talk" and press
l
Select "On" or "Off" to activate or deactivate this setting.
l
6. ASSOCIATING / DISASSOCIATING A HANDSET WITH
THE BASE
6.1

ASSOCIATING AN EXTRA HANDSET WITH THE BASE

You can associate up to 5 handsets with the base.
To register a handset that is not yet associated:
From a handset which has already been registered:
Press to enter the menu.
l
Select "BS Setting" and press
l
Enter "MASTER PIN:" 1590 (by default) and press
l
Select "New HS" and press
l
Enter the PIN code: 1590 (by default) and press
l
Select a number from 1 to 9 or "Auto" and press
l
The numbers which have already been assigned are marked by "–".
42
14:02 Page 42
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.