Workzone AJ54 Manual Del Usuario página 10

1/4 Sheet Sander · 2.0 AMP
Safety Instructions
i) Material containing asbestos should not be sanded. Asbestos is considered to be a
carcinogen.
j) Ensure that bystanders are not endangered by flying sparks. Remove combustible materials
from the immediate vicinity. Flying sparks are produced when metals are sanded.
k) CAUTION! DANGER OF FIRE! Ensure that the work piece and the sander itself do not
overheat. Always empty the dust container before taking a work break. Sanding dust in the dust
bag (or in the filter of a vacuum cleaner) can ignite automatically under unfavorable conditions,
such as flying sparks when sanding metal. There is a particular hazard if the sanding dust is mixed
with paint or polyurethane residues or other chemical substance and work piece is hot after
being sanded on for a prolonged period.
l) When working for extended periods on wood and, in particular, materials that produce dusts
that are hazardous to health, connect the tool to an appropriate external suction device.
m) Provide for sufficient ventilation when sanding plastics, varnishes and paints.
n) Keep your workplace clean. Material mixtures are particularly dangerous. Light metal dust
can burn or explode.
o) Only use an approved extension cord suitable for the power input of the tool. The minimum
conductor size is 18 AWG. When using a cord reel always unwind the reel completely.
AFTER-SALES SUPPORT
7
1855 399 9415
support@sumec-na.com