Maintenance - Workzone AJ54 Manual Del Usuario

1/4 Sheet Sander · 2.0 AMP

Maintenance

Maintenance
Make sure that the sander is not connected to a power source when performing maintenance
or cleaning.
Cleaning
Keep the ventilation slots of the sander clean to prevent overheating of the motor. Regularly
clean the tool housing with a soft cloth, preferably after each use. Keep the ventilation slots free
from dust and dirt. If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as acetone, alcohol, ammonia, etc. These solvents may damage the
plastic parts.
Lubrication
The sander requires no additional lubrication.
Faults
Should a fault occur, e.g. after wear of a part, please contact the customer service center on the
warranty card.
Environment
To prevent damage during transport, this tool is delivered in packaging which consists largely of
reusable material. Therefore please make use of options for recycling the packaging.
Warranty
Please refer to the separately provided warranty card for details of the warranty provision.
AFTER-SALES SUPPORT
15
1855 399 9415
support@sumec-na.com