Getting Started - Workzone AJ54 Manual Del Usuario

1/4 Sheet Sander · 2.0 AMP

Getting Started

Identify all the parts packaged in the carton against the parts list. Remove all protective
materials and place parts on a non-abrasive surface to avoid scratching. Please contact our
customer service center (Monday-Friday 8:30AM-5:00PM ET) at 1855 399 9415 if anything is
missing.
WARNING! Potential risks are possible even when you use this electrical tool
according to the instructions. The following hazards exist during use of this power
tool:
- Lung damage when a suitable dust mask is not used.
- Damage to hearing when suitable ear protection is not used.
- Health damage resulting from hand/arm vibrations when the device is used over a long period
of time or is not used and maintained properly.
WARNING! Some dust created by power sanding, sawing, grinding, drilling and
other construction activities contains chemicals known to the State of California to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are: Lead from lead-based paints, Crystalline silica from
bricks and cement and other masonry products, and Arsenic and chromium from
chemical-treated rubber.
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are specially designed to filter out
microscopic particles.
CAUTION
Read all the instructions before assembly. Failure to do so may result in faulty assembly and
potential injury! Assemble product on a soft, non-abrasive surface such as carpet or cardboard
to avoid damaging the item.
1
support@sumec-na.com
Getting Started
AFTER-SALES SUPPORT
1855 399 9415