koban KPA-01 MINI Manual De Instrucciones página 38

KPA-01 MINI
AC/DC TRUE RMS CLAMP METERAC/DC
second time to turn the backlight off.
Peak Hold (only ACA 200A Range)
The Peak Hold function captures the peak AC/DC current
10~282.8A. The meter
can capture peaks as fast as <1 0 millisecond in duration.
MAX/MIN (DCA,DCV,ACV, Resistance range)
1. Press the MAX/MIN key to activate the MAX/MIN recording
mode. The display
icon "MAX" will appear. The meter will display and hold the
maximum reading
and will update only when a new "max" occurs.
2. Press the MAX/MIN key and "MIN" will appear The display
icon "MIN" will
appear. The meter will display and hold the minimum reading and
will update
only when a new "min" occurs
3. Press the MAX/MIN key and a "MAX MIN" will appear. The
meter will display
DCA ZERO
The DC Zero feature removes offset values and improves
accuracy for DC current
measurements. To perform a zero, select ADC and with no
conductor in the jaw:
1. Press the DC ZERO button 2 Sec. to zero the display. "ZERO"
will appear in the display.
The offset value is now stored and removed from all
measurements.
2. To view the stored value, press the DC ZERO button. "ZERO"
will flash and the stored
value will be displayed.
www.grupotemper.com 9