Publicidad
Idiomas disponibles
Idiomas disponibles
KPA-01 MINI
AC/DC TRUE RMS CLAMP METERAC/DC
3. To exit this mode, press and Hold the ZERO button until
"ZERO" is no longer in the
display.
True RMS (ACA or ACV)
The term stands for "Root-Mean-Square," which represents the
method of calculation
of the voltage or current value. Average responding multimeters
are calibrated to read
correctly only on sine waves and they will read inaccurately on
non-sine wave or
distorted signals. True rms meters read accurately on either type of
signal.
Battery Replacement
1. Remove the one rear Phillips head screw
2. Open the battery compartment
3. Replace the Requires two "AAA" batteries (UM4 R03)
4. Re-assemble the meter
10
www.grupotemper.com
Publicidad
