Original Operating Instructions; Information About The Documentation; About This Documentation - Hilti AG 230-20D Manual De Uso

Ocultar thumbs Ver también para AG 230-20D:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
Störung
Gerät läuft nicht an.
Gerät funktioniert nicht.
Gerät hat nicht volle Leistung. Verlängerungskabel hat zu gerin-
10
Entsorgung
Hilti Geräte sind zu einem hohen Anteil aus wiederverwertbaren Materialien hergestellt. Voraussetzung
für eine Wiederverwertung ist eine sachgemäße Stofftrennung. In vielen Ländern nimmt Hilti Ihr Altgerät zur
Verwertung zurück. Fragen Sie den Hilti Kundenservice oder Ihren Verkaufsberater.
▶ Werfen Sie Elektrowerkzeuge, Elektronische Geräte und Akkus nicht in den Hausmüll!
11
Herstellergewährleistung
▶ Bitte wenden Sie sich bei Fragen zu den Gewährleistungsbedingungen an Ihren lokalen Hilti Partner.

Original operating instructions

1

Information about the documentation

1.1

About this documentation

Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free
handling and use of the product.
Observe the safety instructions and warnings in this documentation and on the product.
Always keep the operating instructions with the product and make sure that the operating instructions
are with the product when it is given to other persons.
1.2
Explanation of symbols used
1.2.1
Warnings
Warnings alert persons to hazards that occur when handling or using the product. The following signal words
are used:
DANGER
DANGER !
▶ Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING
WARNING !
▶ Draws attention to a potential threat of danger that can lead to serious injury or fatality.
CAUTION
CAUTION !
▶ Draws attention to a potentially dangerous situation that could lead to personal injury or damage to the
equipment or other property.
12
English
Mögliche Ursache
Wiederanlaufsperre ist nach einer
Stromversorgungsunterbrechung
aktiviert.
Gerät ist überlastet.
gen Querschnitt.
Lösung
▶ Schalten Sie das Gerät aus und
wieder ein.
▶ Lassen Sie den Ein-/Ausschalter
los und betätigen Sie ihn erneut.
Dann lassen Sie das Gerät ca.
30 Sekunden im Leerlauf laufen.
▶ Verwenden Sie ein Verlänge-
rungskabel mit ausreichendem
Querschnitt.
2121808
*2121808*

Publicidad

Tabla de contenido
loading

Tabla de contenido