Unit Specifications; Warranty Information - Coltene BioSonic UC125 Manual De Usuario

Ocultar thumbs Ver también para BioSonic UC125:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
6
B. Staimless Steel Cleaning
Allowable:
Wash with a clean cloth or rag soaked
with warm water and mild soap or
liquid dish detergent.
Always clean in the direction of the
original polish lines.
Always rinse well with clear water (2
or 3 times) after cleaning. Wipe dry
completely.
Specialized household stainelss steel
cleaner may also be used.
Do Not Use:
Steel or stainless steel wool or scrapers
to remove stuburn debries.
Harsh or abrasive cleaners.
Do not let dirt accumulate.
Avoid:
Cleaners that contain bleach.
Products that contain chloride, flouride,
lodide, or bromide.
Chemicals harmful to use in the tank:
Acetophenone
Aluminum Chloride
Aluminum Floride
Aluminum Sulphate
Aluminum Biflouride
Ammonium Chloride
Ammonium Hydroxide
Amyl Chloride
Antimony trichloride
Aqua Regia
Bromine
Calcium Bisulfate
Calcium Bisulfite
Calcium Hypochloride
Chloracetic Acid
Chloric Acid
Chlorine Anhydrous
Copper Chloride
Copper Fluoborate
Ethyl Chloride
Ferric Chloride
Ferrous Chloride
Ferric Sulfate
Fluoboric Acid
Flourine
Hydrobromic Acid
Hydrochloric Acid
Hydrocyanic Acid
Hydroflouric Acid
Hydrofluosilicic Acid
Iodoform
Mercuric Chloride
Muriatic Acid
Phosphoric Acid
Sodium Hypochlorite
Potassium Chloride
Stannic Chloride
Stannous Chloride
Sulfuric Acid
Zinc Chloride
C. Inspecting the Power Cord Periodically
check the power cord for damage and
see that the connectors at both ends of
the cord are fully seated.
D. Changing the Fuse
1. Remove the power cord from the wall
outlet first and then from the power
cord receptacle on the rear of the unit.
2. The fuse compartment is located
directly next to the power cord
receptacle. To access, take a small, flat-
headed screwdriver to the tab on the
fuse holder. Apply slight pressure to
release the fuse holder (Fig. 9).
3. Gently remove the fuse from the fuse
holder.
4. Examine the fuse (Fig. 10). If blown,
replace with a fuse that matches the
unit's voltage and current (see section
XIII). If fuse appears to be in good
condition return the unit to your dealer
or Coltène/Whaledent.
5. Plug the power cord into the power
cord receptacle on the rear of the unit.
Then plug the power cord into the wall
receptacle.
XIII. Unit Specifications
Transducers: 2
UC125 unit
100 [100V 50/60 Hz, 137W (max.)]
115 [115V 50/60 Hz, 137W (max.)]
230CE [230V 50/60 Hz, 137W (max.)]
230UK [230V 50/60 Hz, 137W (max.)]
240 [240V 50/60 Hz, 137W (max.)]
Operating Frequency:
52 kHz
Tank Capacity:
1.25 gallon or 4.75 L
Use Capacity:
1 gallon or 3.78 L
Overall Dimensions:
16.5 x 10.5 x 13.8 in.
42 X 27 X 36 cm
Tank Dimensions:
11.7 x 6.14 x 5 in.
29.7 x 15.6 x 12.7 cm
Fuse Type:
5 x 20 mm Cartridge
Time Lag:
IEC 60127-2 Sheet 3
100-115V
2 Amp
230-240V
1 Amp
EMC Class A: Suitable for use in all
establishments other than domestic and
those directly connected to a low-voltage
power supply network which supplies
buildings used for domestic purposes.
XIV. Symbols
Caution, Hot Surface
!
Warning/Caution: Refer to
accompanying documents
Caution: Risk of electric shock
Temperature Limits
Humidity Limits
Proper Disposal Required
XV. Warranty Information
The UC125 has been developed specifically
for use in dentistry and intended to be
operated only by dental professionals in
accordance with the instructions contained
in this guide. However, notwithstanding
anything contained herein, the user
shall at all times be solely responsible for
determining the suitability of the product
for the intended purpose and the method
of its use. Any guidance on application
technology offered by or on behalf of
the manufacturer or distributor, whether
written, verbal or by demonstration, shall
not relieve the dental professional of his/
her obligation to control the product
and to make all pro fessional judgments
regarding its use.
This product has been carefully
manufactured and has met stringent
quality assurance requirements. Our
products are manufactured from new
parts or new and serviceable used parts.
Regardless, our warranty terms apply.
If, in normal use, it is found defective in
material or workmanship within a period
of one year from date of purchase, it
will be repaired at Coltène/Whaledent's
option, or replaced. Tampering with any
of the components, misuse, negligence,
BioSonic
UC125
®

Publicidad

Tabla de contenido
loading

Tabla de contenido