Battery Recharge; Setting Date And Time - Midland BIKE GUARDIAN Manual Del Propietário

Battery recharge

BIKE GUARDIAN can be recharged by connecting the USB cable to a proper charger or to a PC
(you can use both cables supplied in the package: the waterproof cable or the one suitable for the
connection PC)
While the camera is being charged the RED led next to the recharge connector will light up and will
turn off once the charge is full.

Setting date and time

1. To download the programming software please visit www.midlandeurope.com
2. Connect the USB cable to the camera and to the PC.
3. Open the software "Bike Guardian".
4. Press on "Sync Date & Time" to update the camera time.
5. When data and time appear on the right blanks, the camera can be disconnected and turned off.
12