Turning The Unit On/Off; Changing Channels - Topcom 7000 Manual De Usuario

12 Using the Twintalker 7000

12.1 Turning the Unit ON/OFF

The main switch is located on the bottom of each unit (6). Set the switch to 'ON' before
switching the unit on.
• To activate; press and hold
current channel, CTCSS/CDCSS code.
• To switch off; press and hold
If the unit is not going to be used for a longer period, set the main switch (6) on the bottom of
the unit to 'OFF'.
12.2 Adjusting Speaker Volume
The Speaker Volume can be adjusted using
displayed.
12.3 Receiving a Signal
The unit is continuously in the receive mode when the unit is on and not transmitting.
In order for other people to receive your transmission, they
must be set on the same channel and CTCSS/CDCSS code
12.4 Transmitting a Signal
• Press and hold
• Hold the unit in a vertical position with the microphone 10 cm from the mouth and speak
into the microphone.
• Release when you have finished transmitting.
PTT

12.5 Changing Channels

The PMR has 8 available channels.
To change channels:
• Press
• Press
• Press
• To confirm and shift to the next option, press
NOTE: Any PMR set on the same channel can receive and listen to the conversation.
Topcom Twintalker 7000
. The unit will "beep" and the LCD Screen will display the
again. The unit will "beep".
to transmit.
PTT
once, the current channel number flashes on the LCD Screen.
or to change the channel.
to confirm your selection and return to the NORMAL mode.
PTT
and . The Speaker Volume level is
.
Topcom Twintalker 7000
7