Turning The Unit On/Off; Adjusting Speaker Volume - Topcom TWINTALKER 9100 Manual De Usuario

Topcom Twintalker 9100
12 Battery Charge Level/Low Battery Indication
The BATTERY CHARGE LEVEL is indicated by the number of squares present inside the
BATTERY icon on the LCD Screen.
When the BATTERY CHARGE LEVEL is low, the BATTERY icon will flash to indicate that
the batteries need to be replaced or recharged.
13 Using the Twintalker 9100

13.1 Turning the Unit ON/OFF

• To activate; press and hold
current channel, CTCSS code and time.
• To switch off; press and hold
displayed.

13.2 Adjusting Speaker Volume

The Speaker Volume can be adjusted using
level is displayed on the LCD.
13.3 Receiving a Signal
The unit is continuously in the RECEIVE mode when the unit is ON and not
transmitting. When you receive a signal on the current channel, the RX icon is
displayed.
In order for other people to receive your transmission, they
must be set on the same channel and CTCSS code
8
Battery Full
Battery 2/3 charged
Battery 1/3 charged
Battery empty
. The unit will "beep" and the LCD Screen will display the
again. The unit will "beep" and only the time is
and . The Speaker Volume
Topcom Twintalker 9100