Media
4. To stop recording, select Stop. The video clip is
automatically saved in Gallery. The maximum length of
the video clip depends on the available memory.
Play a video clip
To play a recorded video clip, select
Select from the following toolbar items:
Send
— Send the video clip to other compatible devices.
•
Send to caller
— Send the video clip to the caller during
•
an active call.
Post to
— Send the video to an online album (network
•
service).
Delete
— Delete the clip.
•
To enter a new name for the clip, select
video.
Image settings
To change the still image settings, select
Settings
and from the following:
Image quality
— Set the image quality. The better the
•
image quality, the more memory the image consumes.
Record location
— To add the location information to
•
the captured image, if the information is available, select
On.
Show captured image
•
capture, select On. To continue capturing images
immediately, select Off.
104
Play
from the toolbar.
Options
Rename
>
Options
>
— To see the image after the
Default image name
•
captured images.
Extended digital zoom
•
allows the zoom increments to be smooth and continuous
between the digital and extended digital zoom. The
option allows a limited amount of zoom while retaining
the image resolution.
Capture tone
— Set the tone that sounds when you
•
capture an image.
Memory in use
— Choose where to store your images.
•
Rotate image
— Rotate the images.
•
Restore camera settings
•
to the default values.
Video settings
To change the video mode settings, select
Settings
and from the following:
Video quality
— Set the quality of the video clip. Select
•
Sharing, if you want to send the video clip using a
multimedia message. The clip is recorded with OCIF
resolution, in the 3GPP file format, and the size is limited
to 300 kB (approximately 20 seconds). You may not be able
to send video clips saved in the MPEG-4 file format in a
multimedia message.
Record location
— To add the location information to
•
the recorded video clip, if the information is available,
select On.
Video stabilization
— To help compensate for the effects
•
of camera shake, select On.
— Define the default name for the
— The
On (continuous)
— Restore the camera settings
Options
© 2008 Nokia. All rights reserved.
option
Off
>