Drc (Dynamic Range Control) - Pioneer F-F6-J Manual De Instrucciones

Listening to DAB broadcasts

DRC (Dynamic Range Control)

• The DRC (Dynamic Range Control)
function lets you change the dynamic
range of the received sound depending on
the content of the broadcast so that the
sound is easier to hear even when the
volume is low.
• The dynamic range can be fine-adjusted in
three steps.
POWER
STANDBY
OFF ON
1
4
7
MEMORY
10
MENU
ST-
BAND
MPX
Press the POWER or  button to turn on
1
the power.
2 Press the MENU button to select menu.
3 Either turn the TUNING/PRESET dial or
press the ST + or ST – button to display the
DRC value mode selection screen.
4 Press the TUNING/PRESET dial or ENTER
button to set the DRC value mode.
TUNING/PRESET
BAND MENU
SECONDARY RDS TUNED STEREO
DISPLAY AUTO TUNE
DIMMER
DISP
2 3
A/B/C
5 6
D/E/F
8 9
G/H
A.PRESET/A.TUNE
I/J
TUNE+
ST+
ENTER
TUNE-
5 Either turn the TUNING/PRESET dial
clockwise or press the ST + or ST – button.
• The display changes as follows each time
the TUNING/PRESET dial is turned
clockwise or the ST + or ST – button is
pressed.
DRC OFF: DRC is switched off.
Any DRC level broadcast will be
ignored. This is the default
setting.
DRC ON : Applies DRC level as sent with
F6
the broadcast.
• This is effective when listening in
environments subjected to surrounding
noise, and while listening to quiet sections
of broadcast programs.
The broadcast's DRC level is set at the
broadcast station.
The DRC can be changed to achieve the
optimum level.
05
25
En