Bissell PROHEAT 2X PREMIER 47A2 Serie Guia Del Usuario página 6

Your deep cleaner comes in three (four on select
models) easy-to-assemble components:
Upper Handle with Screws
Lower Base
Upper Hose Rack
Upper Tool Holder (select models)
The only thing you will need to assemble
your cleaner is a Phillips head screwdriver.
The only thing you will need to assemble
your cleaner is a Phillips head screwdriver.
1. Slide upper handle onto lower handle.
2. Screw 2 screws into the marked holes
(screws will be taped to handle).
3. Place upper hose rack onto back of
upper handle, and secure with screw.
4. Wrap power cord and flex hose. Snap hose
wand into hose clip on upper hose wrap.
NOTE: Take care to wrap the hose in the
right direction in order to make use of the
hose clip. Make sure the hose is wrapped
beginning from the back of the machine
and wrapping toward the front.
Deep cleaner assembly is now complete.
/ WARNING
Do notplug inyour d eep c leaner until
you are familiar withall i nstructions and
operating procedures
4.
Cleanin_l fluid
Keep plenty of genuine BISSELL 2X formula on
hand so you can clean and protect whenever it
fits your schedule. Always use genuine BISSELL
deep cleaning formulas. Non-BISSELL
cleaning solutions may harm the machine and
will void the warranty.
/ WARNING
To reduce therisk o ffire and electric shock
due tointernal component damage, use
only BISSELL cleaning fluids i ntended foruse
with thedeep c leaner
F_ofessional PetStain &Od0r DeepClean Allergen Cleansing Deep C Jean+ Oxv Hard F loor Soluti0ns Pet S tain P reTreat Stain PreTreat
Deep C leaning & Protect
Retreat toIeb penetJate
Bestf0r aJl 0 tJer stains ar_J c ontains and p rotects_orn removetough pet
formuhs patented odor fdtule stains with ar_J l oosen
ldnoval ted_1010gy S (otdlg_d" Rotc<br stains ar_J odors rough s tains
2X C0nc_ltrated X X X X X X
Scotchgard" Protection' X X X
*ONLY BISSELL Protects from future stains with Scotchgard T,_Protector
www.BISSELL.com _r 800.237.7691
6