Machine Storage - Bissell PROHEAT 2X PREMIER 47A2 Serie Guia Del Usuario

cleanin 9 (select models only)
Premier model may have come
floor attachment and 2X Hard Floor
Formula. If not, these products are
for purchase by contacting the BISSELL
Care department by phone or at
isite. The hard floor tool provides
cleaning for linoleum, vinyl, and
)rs. Caution: Do not use on unsealed
floors.
]urn or sweep thoroughly to pick up any
debris and pet hair.
any furniture, if needed.
the hard floor tool onto the bottom
:he machine by hooking it into the nozzle
swinging it down until it clicks into place.
Follow instructions on page 7 to fill the
!-in-1 water tank.
5. Plug into an outlet and turn the power
switch ON.
6. Slowly move the machine forward and
back over hard floor surface one time while
depressing trigger. Caution: Do not overwet.
7. Repeat the motion without pressing
the trigger using the hard floor tool
to squeegee and suction up the
dirty water.
8. Allow adequate time for floors to dry.
9. Remove hard floor tool, rinse and dry
before storing.
/ WARNING
To reduce therisk offireand electric shock- when
cleaning ahard floor, theBISSELL bare fl00r t 001
160-0208 must beused a nd it must 0nlv beused w ith
BISSELL 2X Hard F loor Solutions cleaning fluid intended
foruse withthisappliance.
Machine storage
Once your cleaning is complete, make sure the
2-in-1 water tank is emptied, rinsed out, and
dried before the next use.
NOTE: Store cleaner in a protected, dry area.
Since this product uses water, it must not be
stored where there is a danger of freezing.
Freezing will damage internal components
and void the warranty.