Bissell PROHEAT 2X PREMIER 47A2 Serie Guia Del Usuario página 11

5. Empty the Pet Hair Basket (select models)
by sliding it toward the front of the tank and
lifting up. Replace the Pet Hair Basket before
storing/continuing to clean.
6. Fill the heavy duty bladder with clean hot
tap water, following instructions on page Z
NOTE: Remember to secure the tank latches
and test to make sure it is secure before
picking up the tank.
7. Water rinse (recommended). Rinsing
is an optional step that can be done during the
cleaning process or after the carpeted area has
been completed. Empty the heavy-duty bladder
if necessary, and refill with hot tap water only.
Replace the tank on the machine. Take care to
do a forward (wet) stroke by depressing the
trigger, and a backward (wet) stroke, followed by
a forward and backward (dry) stroke, releasing
the trigger. Continue this until the water you see
coming up the nozzle is clear. (See page 13 for
more machine care tips.)
5,
Stain removal
Do Not Delay! Attending to an accident soon
after it occurs ensures the most optimal clean.
Leaving it for an extended period of time may
cause it to set and become permanent.
1. Blot up liquids with an absorbent cloth or
paper towels. White materials are recommended
because certain dyes may bleed and make the
stain worse.
2. Gently scrape up any semi-solids with a spoon
or spatula. Do not use a knife or other utensil
with sharp edges because it could damage the
carpet or upholstery.
3. If the area has already dried, separate and
remove from the carpet whatever semi-solids
and residue that can be accessed before deep
cleaning.
4. Be sure to test any spot removal formulas in
an inconspicuous area first. This is important as
some dyes and materials could be damaged or
discolored by cleaning solvents. If such a change
should occur, try a different solution or call a
professional.
5. If cleaning on Berber carpeting, gently run
your machine over a hidden area. If no fuzzing
occurs, continue cleaning in soiled area.
6. Using the BISSELL Stain Pretreat, spray
evenly over soiled area. Do not overwet. Wait
3-5 minutes. Gently work the solution by blotting
area with a clean, damp, color safe cloth.
7. Clean large areas with the DeepClean Premier
machine or use the hose to clean spots, stains
and hard-to-reach areas.
www.BISSELL._