Safety Instructions - Hilti TE 7-A Manual De Instrucciones

Power tool
Drilling speed without hammering
Hammer drilling speed
Single impact energy in accordance with EPTA proced-
ure 05/2009
NOTE
en
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment
of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety
measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Noise and vibration information (measured in accordance with EN 60745‑1):
Typical A-weighted sound power level
Typical A-weighted emission sound pressure level.
Uncertainty for the given sound level
Triaxial vibration values (vibration vector sum)
Hammer drilling in concrete, a
Chiseling, a
h, Cheq
Uncertainty (K) for triaxial vibration value
Other information about the power tool
Chuck
Battery
Rated voltage
Capacity
Energy capacity
Weight
Type of cell
Number of cells
Recommended working
temperature range

5 Safety instructions

NOTE
The safety rules in section 5.1 contain all general safety
rules for power tools which, in accordance with the
applicable standards, require to be listed in the operating
instructions. Accordingly, some of the rules listed may
not be relevant to this tool.
20
h, HD
B 36/2.4 NiCd
36 V
2.4 Ah
86.4 Wh
2.1 kg
NiCd
30
-20...+80°C
TE 7‑A
0...800/min
740/min
2.6 J
99 dB (A)
88 dB (A)
3 dB (A)
Measured in accordance with EN 60745‑2‑6
11 m/s²
9 m/s²
1.5 m/s²
TE‑C Click
B 36/3.3 Li‑Ion
36 V
3.3 Ah
118.8 Wh
1.65 kg
Li‑ion
30
-20...+80°C
5.1 General power tool safety warnings
a)
WARNING
Read all safety warnings and all instructions. Fail-
ure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
B 36/3.9 Li‑Ion
36 V
3.9 Ah
140.4 Wh
1.65 kg
Li‑ion
30
-20...+80°C