About The Led Indication - FujiFilm Instax Share SP-2 Manual De Instrucciones

About the LED Indication

Film remaining LED indication
EN
The film remaining LED indicates film remaining,
printer operation, or error warning.
1 film remaining LED turns off every time you print an
image, and flashes slowly to indicate no film remains.
See the table below for other indication patterns.
Operation/Status
You deleted a reprint image.
You reset the password.
You transmitted an image with
no film remaining.
No reprint image
No film pack
Development or communication
error occurred.
14
instax_BO-B_6lang.indb 14
Indication
Flashes rapidly for 1
second.
Flashes slowly for 3
seconds.
Flashes slowly.
Flashes rapidly.
Battery remaining LED indication
The battery remaining LED indicates the printer status
while charging the battery, or battery life of the printer.
See page 6 for indications while charging the battery.
See page 8 for battery life of the printer.
4/13/2016 10:33:40 AM