About The Led Indication - FujiFilm INSTAX SHARE SP-3 Manual De Instrucciones

About the LED Indication

Remaining film LED indication
EN
The remaining film LED indicates film remaining,
printer operation, or error warning.
1 remaining film LED turns off every time you print an
image, and flashes slowly to indicate no film remains.
See the table below for other indication patterns.
Operation/Status
You deleted a reprint image.
You reset the password.
No reprint image
No film pack
No film remaining.
Development or communication
error occurred.
14
instax_BO-C_6lang.indb 14 instax_BO-C_6lang.indb 14
Indication
Flashes rapidly for 1
second.
Flashes slowly for 3
seconds.
Flashes slowly.
Flashes rapidly.
Remaining battery LED indication
The remaining battery LED indicates the printer status
while charging the battery, or battery life of the printer.
See page 6 for indications while charging the battery.
See page 8 for battery life of the printer.
2017/9/14 15:21:12 2017/9/14 15:21:12