Laundrylux Cruce Serie Manual De Instalación página 15

Siting
Install the machine close to a drain standpipe or
floor drain,and within 4 feet of the water supply
spigots. In order to make installation and servicing
the machine easier the following clearances are
recommended:
• At least 20 inches (500 mm) between the
Fig.
machine and the wall behind.
4
• Minimum 1 inch (25 mm) to next machine if
more than one machine is installed in a row.
Floor
The floor must be smooth and hard. Do not
•
install the machine on carpet or other soft
material.
The floor must hold the total weight of the machine
•
filled with water and a load. This static weight is
400 pounds (180 kilograms).
Adjust the leveling legs of the machine, as needed,
•
to ensure that it is level front to back, and side to side,
and so that all four feet are in contact with the floor.
Installation
4
Water supply
2:3
Drain standpipe