Saeco Intelia Deluxe HD8906 Manual De Instrucciones página 28

English
28
The AquaClean filter
cannot be activated as the
tick does not appear on
the display.
The filter cannot be
activated and the
machine asks for
descaling.
The AquaClean filter is
installed, but the
descaling message
appears.
The descaling message
appears before 8 filters
were replaced.
The filter does not fit.
A filter has just been activated.
You have already replaced 8
AquaClean filters. After 8 filter
replacements you need to descale
the machine.
The filter has not been replaced in
time after the AquaClean water filter
signal started flashing.
The filter has not been installed
during first installation but after
having brewed approx.50 coffees
(based on 100ml cups). The machine
has to be completely limescale-free
before installing the AquaClean filter.
The AquaClean filter was not
correctly activated during first
installation.
After 8 filter replacements, you need
to descale the machine.
You did not activate the AquaClean
filter correctly during first installation
You placed the AquaClean filter after
having used the machine for a while.
You did not activate the replacement
filter in the machine menu.
You did not replace the filter when
the filter symbol started flashing.
You need to remove air from the
filter.
There is still water in the water tank.
You try to install another filter than
the AquaClean filter.
You have to dispense at least 10
cups (100of 100ml each before
you can activate a new filter. Be
careful as you activate a new filter,
the filter counter will increase
automatically.You have to
dispense at least 10 cups (100of
100ml each before you can
activate a new filter. Be careful as
you activate a new filter, the filter
counter will increase
automatically.
Descale your machine first and
install the filter.
Descale your machine first and
install the filter.
First descale the machine and
then install a new AquaClean filter.
After descaling, the filter counter is
reset to 0/8. Always confirm filter
activation in the machine menu,
also after filter replacement.
Follow the instructions on the
display until you receive
confirmation that the filter has
been activated.
First descale the machine and
then install a new AquaClean filter.
This will reset the filter counter to
0/8. Always confirm filter
activation in the machine menu,
also after filter replacement.
First descale the machine and
then install a new AquaClean filter.
Always activate the filter in the
machine menu.
Let air bubbles come out of the
filter.
Empty the water tank before you
install the filter.
Only the AquaClean filter will fit.