Medisana FTD Instrucciones De Manejo página 18

GB
3 Measuring procedure
3.4
Measuring the
temperature in
your ear
Stretch your ear
canal by pulling
your ear backwards
and upwards and
carefully insert the
sensor into the ear.
3.5
Measuring the
temperature
at your
forehead
18
1. To measure the temperature in your ear, first remove the sensor
cover .
4
2. Press the On/Scan button
3. If the display
3
re, press the On/Scan button again
was measured is displayed (see Fig.).
4. If the symbol for temperature measurement in the ear
in the display
3
is ready for use (see Fig.).
Press the On/Scan button again
5. As soon as the symbol for continuous temperature measurement
appears (see Fig.), insert the sensor
16
device still whilst measuring. After just a few seconds a short
beep will be heard and the display
body temperature.
6. After the temperature has been measured, the device automatical-
ly switches to the time and ambient temperature display mode.
1. To measure the body temperature at your forehead, the sensor
cover 4 must be attached.
2. Press the On/Scan button
3. If the display
3
re, press the On/Scan button
and the last temperature that was measured will appear on the
display (see Fig.).
3
4. Press the On/Scan button
measurement at the forehead
Fig.). The device is ready for use.
5. Hold the device with the sensor
forehead and press the On/Scan button
On/Scan button
of your forehead to the side, as far as your temple. When you
reach this position, release the button.
.
2
is showing the time or the ambient temperatu-
2
, two short beeps will be heard and the device
2
.
3
.
2
is showing the time or the ambient temperatu-
again. Two beeps will be heard,
2
again. The symbol for temperature
2
appears on the display
14
6
and drag the thermometer from the centre
2
. The last temperature that
appears
15
in your ear. Keep the
6
will show the measured
3
against the centre of your
. Hold down the
2
(see