dirna Bergstrom bycool green line LITE Instrucciones De Montaje página 19

LITE
4
Screw on each M8 / 125x110 stud, an M8 nut and
fit a flat washer Ø 8 and a rubber washer.
5
Screw M8 studs into the inserts of the base leaving
them at the measurement indicated and tighten
nuts against the base of the equipment.
5
6 Screw a M8 nut on each stud and place a flat
washer Ø 8, position brackets on studs and fasten
with (4) flat washers Ø 8 and (4) M8 self-locking
nuts without tightening them.
Caution: For Actros Space cab models, the right
side bracket in the front remains above the original
support (*).
*
4
Rubber washer
5
95
6
Flat Ø 8 wide-brimmed
washer
M8/ 125 self-locking
nut
19
M8 / 125 Nuts
Flat Ø 8
wide-brimmed
washer
M8 / 125 Nut
EN
®