dirna Bergstrom bycool green line LITE Instrucciones De Montaje página 21

LITE
8
Thread 10 mm studs on the M6 inserts of the base
and tighten nuts against inserts.
Caution: Leave hex spacers from the flat part of
the front to the end of the spacer at 105 mm at the
front and at 110mm at the rear.
Caution: Vehicle with (WDF chassis...) no M6
studs or spacers M6 are fitted.
9
Place equipment so that it remains centred
sideways and from the hatch plate profile indicated
(*) to the centre of the M8 studs on the front part
there is a distance of 130 mm.
9
Front
105
9
130
*
9
21
EN
®
Rear
110