Cleaning
WARNING:
• Always pull out the plug from the mains
socket before cleaning and wait until the unit
has cooled down.
• Never immerse the control assembly into
water. It could cause an electric shock or fire.
CAUTION:
• Do not use any wire brush or other abrasive
objects.
• Do not use any acidic or abrasive detergents.
Wait until the deep fryer is completely cool before
cleaning. Wait in any case for 1 to 2 hours after
use before using again to avoid burns.
Deep frying fat container
• In order to change the oil, pull out the deep
frying fat container and pour the oil out at the
side.
• The frying receptacle can be cleaned in warm
water with a mild detergent. It is dishwasher
safe. Take care that excessive detergent is not
used.
Frying baskets and lid
• The baskets, handles, and the lid can all be
washed in warm water with mild detergent.
• Ensure that everything is dried thoroughly after
washing.
Housing and control assembly
Clean these parts with a slightly moist cloth.
Storage
• Clean the appliance as described and let it dry
completely.
• We recommend that you store the appliance in
the original packaging, should you not want to
use it for a longer period of time.
• Always store the appliance out of the reach of
children in a well ventilated and dry location.
Troubleshooting
Device is not working
Troubleshooting:
• Check the mains connection.
• Check the position of the on/off switch.
• Check the position of the thermostat.
Other possible causes:
The device is fitted with a safety switch (6).
This prevents the heater being switched on ac-
cidentally.
Troubleshooting:
Check that the control element is correctly in place.
Overheating Protection
• If the oil gets too hot, the device's overheating
protection will automatically kick in. The appli-
ance is no longer ready to be used.
• Unplug the deep fryer.
• Only after the device has been left to cool
down completely should the "RESTART"
button (7) on the rear of the control element
be operated in order to use the deep fat fryer
again. For this you should use a plastic or
wooden object that is the least 4 cm long.
Technical Specifications
Model: ................................................. PC-FR 1038
Power supply: ............................. 230 V~, 50/60 Hz
Power consumption: .................................... 3000 W
Protection class: ...................................................... I
Net weight: .........................................approx. 3.2 kg
The right to make technical and design modifica-
tions in the course of continuous product develop-
ment remains reserved.
This device complies with all current CE directives,
such as electromagnetic compatibility and low volt-
age directive and is manufactured according to the
latest safety regulations.
51