Environment Protection; Control Panel - AEG AGN81800F0 Manual De Instrucciones

• Connect to potable water supply only
(If a water connection is foreseen).
1.6 Service
• Any electrical work required to do the
servicing of the appliance should be
carried out by a qualified electrician or
competent person.
• This product must be serviced by an
authorized Service Centre, and only
genuine spare parts must be used.

1.7 Environment Protection

This appliance does not contain
gasses which could damage the

2. CONTROL PANEL

Display
1
Temperature warmer button
2
Temperature colder button
3
OK button
4
Mode button
5
ON/OFF button
6
It is possible to change predefined
sound of buttons to a loudly one by
pressing together Mode button and
Temperature colder button for some
seconds. Change is reversible.
2.1 Display
1
Timer function
1
FROSTMATIC function
2
Minute Minder function
3
6
2 3 4 5 6
ozone layer, in either its refriger-
ant circuit or insulation materials.
The appliance shall not be dis-
carded together with the urban
refuse and rubbish. The insula-
tion foam contains flammable
gases: the appliance shall be dis-
posed according to the applica-
ble regulations to obtain from
your local authorities. Avoid
damaging the cooling unit, espe-
cially at the rear near the heat ex-
changer. The materials used on
this appliance marked by the
symbol
1
5 4 3
Child Lock function
4
Alarm indicator
5
Temperature indicator
6
2.2 Switching on
To switch on the appliance do these
steps:
1. Connect the mains plug to the pow-
er socket.
2. Press the ON/OFF button if the dis-
play is off.
3. The alarm buzzer could operate af-
ter few seconds.
To reset the alarm refer to "High
temperature alarm".
4. If "dEMo" appears on the display,
the appliance is in demonstration
mode. Refer to "What to do if..."
paragraph.
5. The temperature indicators show the
set default temperature.
ENGLISH
are recyclable.
2
5